FLIR 在線式紅外熱像儀 A615

簡要描述：FLIR A315 / A615
The information below outlines key features that contribute to FLIR A-Series infrared cameras world class performance.
FLIR 在線式紅外熱像儀 A615

gige
GigE Vision™ standard compatibility

產品型號：A615
廠商性質：經銷商
更新時間：2024-11-18
訪問量：3613

產品咨詢聯系我們

詳情介紹

FLIR A315 / A615

The information below outlines key features that contribute to FLIR A-Series infrared cameras world class performance.
FLIR 在線式紅外熱像儀 A615

	GigE Vision? standard compatibility An industry first. GigE Vision is a new camera interface standard developed using the Gigabit Ethernet communication protocol. GigE Vision is the first standard to allow for fast image transfer using low cost standard cables even over long distances. With GigE Vision, hardware and software from different vendors can interoperate seamlessly over GigE connections.

	GenICam? protocol support An industry first. The goal of GenICam is to provide a generic programming interface for all kinds of cameras. Regardless of interface technology (GigE Vision, Camera Link, 1394 DCAM, etc.) or features implemented, the application programming interface (API) will always be the same. The GenICam protocol also makes third party software being possible to use with the camera.

	640x480 pixels (only FLIR A615) The FLIR A615 has a resolution pixel detector of 640x480 pixels that allows more accuracy and shows more details at a longer distance.

	High speed infrared windowing (only FLIR A615) The FLIR A615 has a high speed infrared windowing option.

	Image flow control Let an external signal control the image streaming.

	High sensitivity < 50 mK < 50 mK thermal sensitivity captures the finest image details and temperature difference information.

	Built-in Gigabit Ethernet connection Real time 16-bit image streaming to computer.

	Lens (only FLIR A315) Built-in 25 degree lens with both motorized focus and autofocus. Optional lenses available.

	FLIR A315f The FLIR A315 can be ordered in an environmental housing. The housing increases the environmental specifications of the FLIR A315 to IP66, without effecting any of the camera features. It is ideal when the camera needs to be installed in dusty or wet environments. The housing is available for cameras that are equipped with a 25o, 45o or 90o lens. Users that want to build in the camera in the housing themselves or that already have a FLIR A315 that needs to be extra protected against dust and water can order the housing separay as an accessory.

FLIR A315 / A615 Technical Specifications

FLIR 在線式紅外熱像儀 A615

Camera specific

	FLIR A315	FLIR A615
Imaging and optical data
Spatial resolution (IFOV)	1.36 mrad	0.69 mrad
Focal length	18 mm	24.5 mm
F-number	1.3	1.0
Image frequency	60 Hz	50 Hz (100/200 Hz with windowing)

Detector data
IR resolution	320 × 240 pixels	640 × 480 pixels
Detector pitch	25 μm	17 μm
Detector time constant	Typical 12 ms	Typical 8 ms

Measurement
Object temperature range	–20 to +120°C 0 to +350°C	-20 to +150°C 0 to +650°C +300 to +2000°C

USB
USB	N/A	Control and image
USB, standard	N/A	USB 2 HS
USB, connector type	N/A	USB Mini-B
USB, communication	N/A	TCP/IP socket-based FLIR proprietary
USB, image streaming	N/A	16-bit 640 × 480 pixels at 25 Hz 16-bit 640 × 240 pixels at 50 Hz 16-bit 640 × 120 pixels at 100 Hz - Signal linear - Temperature linear - Radiometric
USB, protocols	N/A	TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP

Ethernet
Ethernet, image streaming	16-bit 320 × 240 pixels at 60 Hz - Signal linear - Temperature linear - Radiometric GigE Vision and GenICam compatible	16-bit 640 × 480 pixels at 50 Hz 16-bit 640 × 240 pixels at 100 Hz 16-bit 640 × 120 pixels at 200 Hz - Signal linear - Temperature linear - Radiometric GigE Vision and GenICam compatible

	FLIR A315 - Standard	FLIR A315f - Environmental housing	FLIR A615 - Standard
Environmental data
Operating temperature range	–15°C to +50°C	–25°C to +50°C	–15°C to +50°C
Encapsulation	IP 40 (IEC 60529)	IP 66 (IEC 60529)	IP 40 (IEC 60529)
Bump	25 g (IEC 60068-2-29)	5 g, 11 ms (IEC 60068-2-27)	25 g (IEC 60068-2-29)

Physical data
Weight	0.7 kg	5 kg	0.9 kg
Camera size (L × W × H)	170 × 70 × 70 mm	460 × 140 × 150 mm	216 x 73 x 75 mm
Tripod mounting	UNC ?"-20 (on three sides)	N/A	UNC ?"-20 (on three sides)
Base mounting	2 × M4 thread mounting holes (on three sides)	TBA	2 × M4 thread mounting holes (on three sides)

System features
Automatic heaters	N/A	Clears ice from window	N/A

General

Imaging and optical data
Field of view (FOV) / Minimum focus distance	25° × 18.8° / 0.4 m
Lens identification	Automatic
Thermal sensitivity/NETD	< 0.05°C @ +30°C / 50 mK
Focus	Automatic or manual (built in motor)

Detector data
Focal Plane Array (FPA) / Spectral range	Uncooled microbolometer / 7.5–13 μm

Measurement
Accuracy	±2°C or ±2% of reading

Measurement analysis
Atmospheric transmission correction	Automatic, based on inputs for distance, atmospheric temperature and relative humidity
Optics transmission correction	Automatic, based on signals from internal sensors
Emissivity correction	Variable from 0.01 to 1.0
Reflected apparent temperature correction	Automatic, based on input of reflected temperature
External optics/windows correction	Automatic, based on input of optics/window transmission and temperature
Measurement corrections	Global object parameters

Ethernet
Ethernet	Control and image
Ethernet, standard	IEEE 802.3
Ethernet, connector type	RJ-45
Ethernet, type	Gigabit Ethernet
Ethernet, communication	TCP/IP socket-based FLIR proprietary and GenICam protocol
Ethernet, protocols	TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP

Digital input/output
Digital input	2 opto-isolated, 10–30 VDC
Digital output, purpose	Output to ext. device (programmatically set)
Digital output	2 opto-isolated, 10–30 VDC, max 100 mA
Digital I/O, isolation voltage	500 VRMS
Digital I/O, supply voltage	12/24 VDC, max 200 mA
Digital I/O, connector type	6-pole jackable screw terminal
Digital input, purpose	Image tag (start, stop, general), Image flow ctrl. (Stream on/off), Input ext. device (programmatically read)

Power system
External power operation	12/24 VDC, 24 W absolute max
External power, connector type	2-pole jackable screw terminal
Voltage	Allowed range 10–30 VDC

Digital input/output
Digital input, purpose	Image tag (start, stop, general), Image flow ctrl. (Stream on/off), Input ext. device (programmatically read)

Environmental data
Storage temperature range	–40°C to +70°C
Humidity (operating and storage)	IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C
EMC	? EN 61000-6-2:2001 (Immunity) ? EN 61000-6-3:2001 (Emission) ? FCC 47 CFR Part 15 Class B (Emission)
Vibration	2 g (IEC 60068-2-6)

Physical data
Housing material	Aluminium

Scope of delivery
Hard transport case or cardboard box, Infrared camera with lens, Utility CD-ROM, Calibration certificate, Ethernet? cable, USB cable (FLIR A615), Mains cable, Power cable (pig-tailed), Power supply, Printed Getting Started Guide, Printed Important Information Guide, User documentation CD-ROM, Warranty extension card or Registration card, 6-pole screw terminal (mounted on camera)